SAI™ ROLLING STAND
RS-BG, RS-BL AND RS-MAL

The SAI™ Rolling Stand has been developed specifically for use with various SAI™ Airflow Visualization Systems. It has three primary applications. The first is to support a Bubble Generator System with one or two Wands; the second, to support one or more Basic Lights; and the third, to support a single Modulated Arc Lamp.

The Stand is all built with substantial, quality parts. It is very simple to assemble or disassemble and easy to operate. It also has a lot of flexibility. Nominally, it can reach a height of 9’, but the standard height supplied is to reach a height of 6’.

The base is a 4-leg pedestal configuration about 3’ on the diagonal from wheel center to wheel center. The wheels are pivoted on ball bearings and may be locked from wheel rotation. It is enhanced with two trays attached across the legs. The edges of the trays are finished with Trim-Lok. These trays are handy for tools, small parts and so forth while testing. More importantly, with the Trim-Lok, they can serve as good places to put larger pieces of related equipment. For example, one tray can be a base for the SAI™ Bubble Generator, itself, and the other, for the SAI™ Auxiliary Air and Helium Supply when the Stand is used to hold one or two Wands.

Several Wands or Lights may be held by a single Stand since the Stand is quite stable, even at 9’. Adjustment of the height of the Wands or Lights is very easy. This greatly facilitates rapid changes, especially in minimal light.

We are really excited about our new piece of equipment. Based on many years of experience over a wide range of applications, it is our belief that the SAI™ Rolling Stand will prove of considerable value to you!

SPECIFICATIONS -

SAI™ ROLLING STAND
RS-BG, RS-BL AND RS-MAL

Principal Materials: Aluminum, Plated Steel, Plastic, Vinyl, Delrin, Rubber

Overall Dimensions: 26” x 26” x 113.5”

Overall Weight: 22 Lbs

Major Components: 4 Legs w/ Wheels, 1 Connector Cross, 1 U-Channel Section Holder, 3 U-Channel Sections, 2 Section Connectors, 2 Support Brackets w/ Attachment Fixture, 1 Tray, 2 T-Handle Hex Keys, 1 Cord Reel

Minimum Stand Height: 3’

Normal Stand Height: 6’

Maximum Stand Height: 9’

Number Of Basic Lights Per Section: 2

U-Channel Section Dimensions: 1 5/8” x 1 5/8” x 36”

Leg Dimensions: 17” x 1 5/8” x 1 5/8”

Support Bracket w/Attachment Fixture: 1.5” x 6” Shelf, Right Hand, w/ 1.4” Dia x 2.5” Delrin Cylinder

Wheels: Threaded-Stem Caster, 3” Dia x 15/16” Rubber, Ball Bearing Swivel, 100 Lbs Capacity

SAI™ Rolling Stand w/ Wands, Bubble Generator and Auxiliary Air & Helium Supply